Select Model
Enter Material Density (kg/m3)
Select Material Type
Enter Spread Width (m)
Enter Target Rate (kg/ha)
Door Opening: |
|
Sprocket Side A: |
|
Sprocket Side B: |
|
Estimated Rate: |
Door Opening: |
|
Sprocket Side A: |
|
Sprocket Side B: |
|
Estimated Rate: |
Select the model number of your machine from the pull down menu. The model number is shown on the green or red ID plate located on the front of the hopper. If the model number is not shown please contact the Multispread support team.
Enter the density of the material to be spread in kg/m3. Recommended material bulk densities are as follows:
| Urea | 700 kg/m3 |
| DAP | 930 kg/m3 |
| NPK | 1000 kg/m3 |
| Lime | 1000 kg/m3 |
| Gypsum | 1100 kg/m3 |
| Superphosphate | 1150 kg/m3 |
Fertiliser properties vary depending on how the product is handled, moisture content, humidity and other environmental factors. Always check fertiliser bulk density, particle distribution and toughness prior to starting work.
Enter the required spread width in metres. Spread widths vary from 6 to 36m depending upon the product being spread.
Enter your target application rate in kg/ha.