Setup
From the Home screen, tap the Settings button to navigate to the Settings screen.
- Home button. Tap the Home button to return to the Home screen.
-
Coms button. This indicates whether the device is connected to the i4M Tacho.
To edit any of the settings on this screen, the device must be connected to the i4M Tacho. For more information, see
Connect.
- Set swath width button. Tap this button and follow the prompts to set the swath width. This is used in conjunction with the wheel sensor pulses per metre to calculate the hectares covered.
- Set wheel sensor pulses button. Tap this button and follow the prompts to set the wheel sensor pulses per metre. This value is used to calculate the distance travelled by the machine. This is used in conjunction with the swath width to calculate the hectares covered.
- Hopper sensor button. Tap this button and follow the prompts to set whether there is a sensor installed for detecting when the hopper is empty. If a hopper sensor is installed, an alert will be given on the work screen when trying to run the belt while the hopper is empty.